TC Installations TCENC101 Fiche technique télécharger pdf (Page 2)

TC Installations Limited

Units 11 – 13 Highlode Industrial Estate, Stocking Fen Road Ramsey, Cambridgeshire. PE26 2RB

Tele: +44 (0) 1487 710555

FAX +44 (0) 1487 710060

18-11-08

Page 2 of 2

TCENC101 Fixing Notes:

1. The enclosure is provided with four fixing plates which are fitted to the enclosure using the

M5 countersink screws provided (8).

NOTE: All four fixing plates are to be used to mount the enclosure.

The plates can be secured to uni-strut using the (4) M6 bolts provided. The large M6 washer is to

be placed between the fixing plate and the uni-strut. Wall fixing use M6 Rawl Bolts (not

supplied).

2. Remove knockouts to suit installation requirements.

3. Fitting the Data/Antenna Cable ( Diagram 1)

a) Remove the Gland nut and silicon seal. Pass cable through the nut and the Gland into

enclosure. Make connections inside the enclosure. Fit Silicon seal around cable.

b) Ensure that rubber seal in the gland is in place then pass Silicon seal into Gland leave

5mm protruding.

c) Tighten the Gland nut. Silicon seal will grip cable and form a water tight seal.

Diagram 1

Coaxial Cable

Lock Nut

Enclosure

Silicon Seal

Gland Nut

1 2

Pas de commentaire

TC Installations TCENC101 Fiche technique Page 2