TC Installations TCENC201 Fiche technique télécharger pdf

18-11-08

Page 1 of 1

TC Installations Limited

Units 11 – 13 Highlode Industrial Estate, Stocking Fen Road, Ramsey, Cambridgeshire. PE26 2RB.

Tele: +44 (0) 1487 710555

FAX: +44 (0) 1487 710060

Part No: TCENC201

•

Flameproof

•

ATEX II 2GD EEx d IIC T6/T5

•

Operating Temp. Range -10°C to +50°C IP66

•

II 2 GD EExd IIC T5/T6 @Ta55°C IP66 T85°C or T100°C

The iWAP100 has been developed to deploy ethernet

networks wirelessly in hazardous areas. Two increased

safety omni-directional high performance antennas are

used, meaning coverage is greatly enhanced. They can

be mounted locally on the enclosure using the brackets

supplied or on a wall away from the iWAP100

electronics enclosure so they can be mounted in the

optimum position for best coverage of the area.

The iWAP100 is available in many versions and can be

supplied with industry leading wireless network

manufacturers hardware such as Symbol AP5131 or

Cisco Systems AP1200 Access Points for direct

connection to ethernet hubs or switches) or the Symbol

AP300 Access Port (for connection to a Symbol

wireless switch) Network speed is up to 54Mbps and

compliant with IEEE 802.11a, b, g and is WiFi

certified.

Connection back to the safe area server is via your own

IT infrastructure by either CAT5E / STP cable or fibre

optic cables.

If the WLAN is outside and the antennas are at risk of

lighting strikes surge suppressors can be built in to

protect your network hardware. Also a heater can be

installed to ensure that condensation or cold is not a

problem in installations subjected to cold and high

humidity.

Complete systems including site surveys and

commissioning are available from T C Installations

Limited.

Technical Data:

Component iWAP 100

Supply Voltage

24v DC or 110-230v AC or power over ethernet (POE) (note heater and fibre

options not possible with POE)

Material

Grade LM6 cast alloy with epoxy coating

Mounting

Wall or any flat surface using 4 bolts/screws

Cable entry

Bottom face 2 x M20 & 1 x M25 for data and power connections. Right and left

side, 1 x M20 for connection of antenna. Threaded gland entries are for use

with certified ATEX Exd glands.

Radio Network

Network hardware dependant - 802.11a,b,g compliant, 54Mbit/s on 2.4 & 5GHz

Interface

iWAP100-4 : RS232, RS422 and RS485

Weight

Approx 14 Kg depending on version

Ambient Temperature

-10°C to +50°C (-20°C to +55°C on request)

Dimensions

280mm x 276mm x 214mm (WxHxD)

IP Rating

IP66

Certification Type

II 2 GD EExd IIC T5/T6 @Ta55°C IP66 T85°C or T100°C

Certification Number

DEMKO 03 ATEX 136110

Résumé du contenu

Page 1

18-11-08 Page 1 of 1 TC Installations Limited Units 11 – 13 Highlode Industrial Estate, Stocking Fen Road, Ramsey, Cambridgeshire. PE26 2RB. Tele: +

Commentaires sur ces manuels

Pas de commentaire

TC Installations TCENC201 Fiche technique

Naviguer en ligne ou télécharger Fiche technique pour Antennes de réseau TC Installations TCENC201. TC Installations TCENC201 network antenna Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Antennes de réseau TC Installations TCENC201